Products

Contact us

 

Rotating Sintering Furnace For Gaskets

SuKo rotating sintering furnace are used to sinter molded parts, thermally enhance products qualities, and almost all heated processes in the Fluor polymer family supply chain. Manufacturers come to SuKo because we carefully review and adjust heat and air flow needs of each SuKo Oven for compatibility with the products processed.

Rotating Sintering Furnace For Gaskets

How May I Customize This Furnace?

SuKo Builds Complete, packaged and modularly built ovens for heating, drying, baking, or curing in your laboratory or industrial applications based upon standard design features and modular design options below. Each oven is engineered and constructed for years of dependable service and for easy low cost maintenance. With our modular oven design integration capability, your capital outlay is reduced by purchasing only those features that your product or process require. Safety, serviceability, and efficiency by design assures long term savings in use.

 

1.      Product name,: Customized

2.      Chamber size: Depend on customer choice.

3.      Thermostat section

3.1.            Working temperature: room temperature--400℃ Temperature stability : ≤±1degree (temperature meter) Temperature uniformity ≤±3 degree

 

3.2.            The ambient temperature raises to 400 ℃ in 50 minutes (full load)

4.      Control section (Separate, Independent, stand mounted control cabinet)

4.1.            controller model: XMTA

 

4.2.            controller brand: China Brand Norwich sea

4.3.            temperature controller function: PID control, automatic temperature control thermostat program

4.4.            heating portion

 

1)      Heating method: stainless steel heater uniformly arranged around the heating portion

 

2)      The heating element: stainless steel heat pipe, (304 stainless steel heating pipe, heating pipe , 220V / 2.5KW, U connection.)

 

3)      Heating power: 54kw

4)      The heating control, heating control two groups/sides.

 

5)      The ventilation system: made of stainless steel produced by 2.0, about duct hot air circulation. Each heating zone and wind zone relatively independent ventilation system (four air guide) to ensure that the furnace temperature uniformity.

 

6)      Speed of turntable: 8 round/min

 

Technical date sheet

1

Model

HJ-101010

 

2

Chamber Size

Depend on customer choice

 

3

shelf

50-100 mm distance (No of shelf can be change)

 

4

Temperature range

Chamber temperature +15℃-400℃,

 

5

Heating time

Chamber temperature raise up to 400℃ in 50 minutes

 

6

Temperature fluctuation

±1℃

 

7

Temperature uniformity

±5℃ Test  should  be  heated  60 minutes after the test

Air furnace status

8

power supply

AC380V 50HZ

 

9

Liner material

2.0mm Stainless steel

 

 

10

door

Through type, door, double door

Leveraged

11

Air supply

The level of circulating air (wind)

 

12

Temperature control instrumentation

XMTA

Nuohai

13

Temperature control

PID+Solid state relays control

Ouya

14

Temperature Sensor

K Thermal couple

Shanghai Feeling

15

Heating equipment

Stainless steel electric heating tube

China Brand

16

Furnace insulation materials

High temperature silica glass fiber cotton

China Brand

17

Sealing material

High temperature resistant

China Brand

18

Motor protection

Overheating of the motor over-current protection with thermal cycling

China Brand Meibang

19

Time Control

with work piece time timer

Shanghai

20

Alarm system

To time with sound and light alarm

Shanghai

21

Phase protection device

With motor phase protection

Delix

22

Current display

With three-phase ammeter display

Yichuan

23

Voltage display

450V voltmeter with display

Yichuan

24

Main MCCB

 200A The main control circuit breaker

Renming

25

Fans AC contact

1210 type

Renming

26

Heating contact

6310 type

Renming

27

Trolley motor contact

1810 type

Renming

28

Electric work instructions

*22

Renming

5.      Material:

5.1.            The outer shell is made of 1.5mm cold plate manufacturing high temperature spray paint, color matt light blue color.

5.2.            The liner is made of 2.0mm stainless steel plate

5.3.            The Case for the vertical routinely

5.4.            Locking means for the oven: door locks and hinges alloy steel alloy steel.

6.      Insulation and heat preservation

6.1.            Case insulating material: high temperature aluminum silicate fiber cotton filling.

6.2.            The cabinet insulation layer: thickness of 150mm (body surface temperature of the ambient temperature plus 35 degrees)

6.3.            The sealing material 20 * 20mm high-temperature glass fiber strip seal

 

7.      Oven Cabinet making

 

Inside the oven using models and stainless steel plate welded together. Wall panels with 1.5mm cold plate, set reinforcing internal ribs. Liner made of 2.0mm stainless steel production base and frame with a 10 channel welded

Long-life heating element made of stainless steel heating tube evenly distributed over both sides of the furnace duct using Choucha installation, wiring head out of the top heating plate outer shell, using nut, rigid fixation, will not fall, set top heating wiring shield. Heating element from front to back is divided into three temperature zones wiring.

Hot air circulation fan installed in the box about four Typhoon aircraft along the longitudinal direction of the furnace are arranged into two, each column 2, the use of ovens with cooling fins with the long axis of the motor, the fan with the overall installation, this type of fan has good stability , low noise, easy installation and maintenance and so on. Fans around the wind guide layer in an oven in the use of wind wheel wind, hot air circulation in the furnace to form a vortex, cabinets ensure temperature uniformity.

Temperature control of the electronic control system is divided into the front to the rear three-zone temperature control, Fuji intelligent digital temperature control instrumentation program accepts thermocouple temperature sensing element signal, PID control power controller controls power adjustment cycle, cycle controller controls the non-contact the opening of the power components solid state relays, solid state relays on and off, to control the heating element that is powered on or off, so as to achieve the purpose of controlling the temperature. Heating circuit configured with AC contact and fuses do secondary protection against solid short-circuit power element damage the equipment. Hot air circulation fan control configuration circuit breakers, AC contactors, thermal relays, start and stop button, with

short circuit, overcurrent, overheating protection, heating control and fan operation interlock to prevent burning heating element. Control system with current, voltage indication, the working status indication.